Drilling Simulator


Drill Sim 1 for iPad



Drilling Simulator for iPad 2.1

Introductory Level

DS2_512


This project is no longer on the App Store !

User Guide: Web Version Download PDF

See videos at Youtube: 

1- Basic Drilling: https://www.youtube.com/watch?v=A9aEz3D5a8I

2- Blowout Simulation:  https://www.youtube.com/watch?v=n61Fu9dd0jE

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit; 
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque; 
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate. 
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status; 
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about; 
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2; 
7) Select floating rig or land rig; 
8) Select unit systems: International, field1 (imperial) and field2 (mix); 
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel; 
10) Select rheological models: Power or Bingham; 
11) Set gradients: absorption, fracture and temperature; 
12) Set jet nozzles or fixed TFA; 
13) Set choke parameters and BOP test pressure; 
14) Set Surface circulation volume; 
15) Set surface circulation equipments (mud pump and lines); 
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard); 
17) Save configuration to data files and share by iCloud; 
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power; 
20) Register the kill line losses and pump pressure at the kill speed; 
21) show the well with drillstring and the drillbit on rotating; 
22) Show schematic of well with drillstring, kick and neutral point (%); 
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection; 
24) Shut-in the well using hard method; 
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume; 
26) behavior of the kick: keeping the well closed and keeping the well opened; 
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop; 
28) Capacities and Volumes calculations; 
29) Hydrostatic and critical pressures calculations; 
30) Hydraulics calculations; 

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

gas_bubble

DS2_21_02
DS2_21_03
DS2_21_04
DS2_21_05
DS2_21_06
DS2_21_07
DS2_21_08
DS2_21_09
DS2_21_10
DS2_21_11
DS2_21_12

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br



Drill Sim1 for iPhone



Drilling Simulator for iPhone and iPod Touch 2.1

Introductory Level


DS1_512


This project is no longer on the App Store !

User Guide: Web Version Download PDF

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit; 
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque; 
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate. 
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status; 
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about; 
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2; 
7) Select floating rig or land rig; 
8) Select unit systems: International, field1 (imperial) and field2 (mix); 
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel; 
10) Select rheological models: Power or Bingham; 
11) Set gradients: absorption, fracture and temperature; 
12) Set jet nozzles or fixed TFA; 
13) Set choke parameters and BOP test pressure; 
14) Set Surface circulation volume; 
15) Set surface circulation equipments (mud pump and lines); 
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard); 
17) Save configuration to data files and share by iCloud; 
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power; 
20) Register the kill line losses and pump pressure at the kill speed; 
21) show the well with drillstring and the drillbit on rotating; 
22) Show schematic of well with drillstring, kick and neutral point (%); 
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection; 
24) Shut-in the well using hard method; 
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume; 
26) behavior of the kick: keeping the well closed and keeping the well opened; 
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop; 
28) Capacities and Volumes calculations; 
29) Hydrostatic and critical pressures calculations; 
30) Hydraulics calculations; 

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

gas_bubble

DS1_21_02
DS1_21_03
DS1_21_04
DS1_21_05
DS1_21_06
DS1_21_07
DS1_21_08
DS1_21_09
DS1_21_10

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br




Drill Sim 2 for iPad & iPhone



Drilling Simulator 2 

Designed for both iPhone and iPad

drillsim2_1024


View User Guide for iPad (HTML)

Download User Guide for iPad (PDF)

Screenshots on iPad Pro


DrillSim2_10_01

DrillSim2_10_02

DrillSim2_10_03

DrillSim2_10_05

DrillSim2_10_06

DrillSim2_10_07

DrillSim2_10_08

DrillSim2_10_09

DrillSim2_10_10

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio4

Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

wellcontrol_url

contact@wellcontrol.com.br




Drill Sim 3 for iPad & iPhone



Drilling Simulator 3

 designed for both iPhone and iPad

DrillSim3f_1024

Available_on_the_App_Store_Badge_US_UK_135x40_0824

User Guide (pdf)

User Guide (html)

Drilling Simulator 1:

– Drilling on vertical well, kick detection, shut-in, stabilisation of pressures (sidpp, sicp, kick volume), save to iCloud to import from other app "Well Control Simulator".

Drilling Simulator 2:

all of drilling simulator 1 PLUS Direcional and horizontal wells, well control using 01 choke and 01 single kick bubble on borehole and graphical analysis.

Drilling Simulator 3 (New)

all of drilling simulator 2 PLUS: 

1 - until 03 single kick bubbles on the borehole simultaneously

2 – standpipe manifold and choke manifold with 02 chokes and straight through

3 – failures schedule with Random option: 

- Mud Pumps 1 and 2 “power end failure” or “fluid end failure”, 

- Chokes 1 and 2 “plugged” or “washed”, 

- One Drill Bit Nozzle “plugged” or “washed”

screenshots on iPad Pro 12.9 inch:

drillsim3_10_01

drillsim3_10_05

drillsim3_10_02

drillsim3_10_03

drillsim3_10_04

 screenshot on iPhone 6 Plus:

drillsim3_10_01i

drillsim3_10_02i

drillsim3_10_03i

drillsim3_10_04i

drillsim3_10_05i

Gas_Bubble_Concept

Visit our Portfolio on the App Store for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

portfolio_2015_2


Visit our website for more Oil & Gas apps for iPhone, iPod Touch, iPad and Mac OS X.

oilgasapps_website_640

or http://www.oilgasware.com

contact@wellcontrol.com.br




Gas Bubble Concept



Gas_Bubble_Concept



Comparison between Our Simulators



Comparison between our Simulators

- Drilling Simulator
- Well Control Simulator
- Driller’s Method Simulator
- Wait and Weight Simulator
- Kick Game

All for iPhone and iPad

Please check all slides
More details at www.wellcontrol.com.br

Did you like our content? - Like it ❤️ - Follow Us! - Share your experience with your friends!

Thanks

comparison_01

comparison_02

comparison_03

comparison_04

wellcontrol_apps_blogs