target="_self"
Oil and Gas Softwares
for iPhone, iPod Touch, iPad and Mac













Oil & Gas Network

Join to our group
"Oil & Gas Systems"
on LinkedIn
Oil & Gas Softwares

Our Social Profiles:






Oil & Gas Links: Petrobras
ANP - Agência Nacional do Petróleo, Gás Natural e Biocombustíveis

IADC

IWCF - International Well Control Forum


SPE - Society of Petroleum Engineers


Advertisements:

Wellcon - Treinamento e Consultoria

SQC - Training & Consulting


Drilling Simulator

Drill Sim 1 for iPad- Drill Sim1 for iPhone- Drill Sim 2 for iPad & iPhone- Drill Sim 3 for iPad & iPhone-

Drilling Simulator for iPad 2.1

Introductory Level

DS2_512


This project is no longer on the App Store !

User Guide: Web Version Download PDF

See videos at Youtube: 

1- Basic Drilling: https://www.youtube.com/watch?v=A9aEz3D5a8I

2- Blowout Simulation:  https://www.youtube.com/watch?v=n61Fu9dd0jE

Features: 

1) Panel with the following parameters: pump pressure, mud pump speed, strokes totalizer, flow rate, mud weight, bit depth, rotary speed, hookload and weight on the bit; 
2) Instruments with pointers to the parameters: pump pressure, hookload, weight on the bit and rotary torque; 
3) Geolograph with parameters: drillpipe pressure, choke pressure, active volume, hookload, weight on the bit, length drilled, flow in, flow out, percent of flow, rotary torque, rotary speed and drilling rate. 
4) Panel with alarms: pump failure, vol high, flow high, bop failure, bop status and choke status; 
5) Toolbar with buttons: Well Config, Circulation Options, Set Alarms, Graph Limits, X-times faster, Pause/Continue, Restart, Send by email, about; 
6) set drillstring with drillpipe1, drillpipe2, heavy-weight, drillcollar1 and drillcollar2; 
7) Select floating rig or land rig; 
8) Select unit systems: International, field1 (imperial) and field2 (mix); 
9) set fluid parameters: mud weight, plastic viscosity, yield point and initial gel; 
10) Select rheological models: Power or Bingham; 
11) Set gradients: absorption, fracture and temperature; 
12) Set jet nozzles or fixed TFA; 
13) Set choke parameters and BOP test pressure; 
14) Set Surface circulation volume; 
15) Set surface circulation equipments (mud pump and lines); 
16) Set four formations to drilling (height, pore gradient, fluid density and sof/hard); 
17) Save configuration to data files and share by iCloud; 
18) Select circulation options: drillpipe -> Riser, Kill -> Riser, and Close BOP;
19) Set alarms: pit gain, flow rate out, max pump pressure and max pump power; 
20) Register the kill line losses and pump pressure at the kill speed; 
21) show the well with drillstring and the drillbit on rotating; 
22) Show schematic of well with drillstring, kick and neutral point (%); 
23) Adjust pump speed, weight on the bit and rotary speed to drilling until kick detection; 
24) Shut-in the well using hard method; 
25) Register shut-in drillpipe pressure (SIDPP) and choke pressure (SICP) and gain volume; 
26) behavior of the kick: keeping the well closed and keeping the well opened; 
27) Simulations: Drilling, Kick detection, Shut-In, Underground Blowout at shoe and blowout with failure of bop; 
28) Capacities and Volumes calculations; 
29) Hydrostatic and critical pressures calculations; 
30) Hydraulics calculations; 

Note: This Drilling Simulator NOT allows to control the well after the kick detection and shut-in. The simulation ends after the simulations of underground blowout and blowout to surface.

gas_bubble

DS2_21_02
DS2_21_03
DS2_21_04
DS2_21_05
DS2_21_06
DS2_21_07
DS2_21_08
DS2_21_09
DS2_21_10
DS2_21_11
DS2_21_12

wellcontrol_url.png

contact@wellcontrol.com.br

http://www.wellcontrol.com.br